On-Premises Rear Control Front Load Washer
Our front load washers use as little as 13.68 gallons (51.8 liters) per cycle, saving 40 percent more than many commercial top load washers. Fast cycle times get the job done quickly, while a large-capacity cylinder provides room for bulky items.
Our high spin speed up to 440 G-Force removes more water from clothes, speeding up drying cycles and lowering dryer energy usage.
Improved suspension with new out-of-balance logic manages and redistributes unbalanced loads for uninterrupted wash cycles.
A pump drain allows our front load washers to be installed adjacent to, or replace, top load washers with no special plumbing. (A gravity drain option is also available.)
The Electronic Control keeps users informed throughout the wash process with cycle-status lights and a digital cycle countdown. Users also have the flexibility to control temperature, load type and soil levels, as well as options for prewash and/or additional rinse to achieve high levels of efficiency.
On-Premises Rear Control Front Load Washer Specifications
|CONTROL OPTION||Electronic Homestyle|
|CAPACITY – lb (kg)||21.5 (10)|
|CYLINDER VOLUME – cu. ft. (liters)||3.42 (96.8)|
|OVERALL WIDTH – in (mm)||26.875 (683)|
|OVERALL DEPTH – in (mm)||27.73 (704)|
|OVERALL HEIGHT – in (mm)||43 (1092)|
|SPIN SPEED G-FORCE -RPM||440 (1200)|
|MOTOR POWER CONSUMPTION –
hp (kw) VARIABLE SPEED INDUCTION
|WATER CONSUMPTION PER CYCLE -g (l)||13.68 (51.8)|
|IWF (Water Factor)||4.0 (0.53)|
|IMEF (Modified Energy Factor)||2.20 (62.3)|
|AVAILABLE WATER TEMPERATURES||3|
|*AVAILABLE CYCLES||Heavy Duty, Normal Eco, Perm Press, Delicate,
Rinse & Spin, Spin Only
|WATER PRESSURE -PSI (Bar)||20-120 (1.4/8.3)|
|CYCLE INDICATOR LIGHTS||Yes|
|CYLINDER FINISH||Stainless Steel|
|DOOR TYPE (Solid/Window)||Window|
|AVAILABLE ELECTRICAL REQUIREMENTS –
Voltage/Hz/Ph – Circuit Amperage
|120/60/1 – 15|
APPROX. – in (mm)
|NET WEIGHT – lb (kg)||260 (118)|
|SHIPPING WEIGHT – lb (kg)||270 (122)|
|A. OVERALL WIDTH – in (mm)||26.875 (683)|
|B. OVERALL DEPTH – in (mm)||27.73 (704)|
|C. OVERALL HEIGHT – in (mm)||43 (1092)|
|D. DOOR BOTTOM TO FLOOR- in (mm)||14.6 (371)|
|C. DOOR SWING – in (mm)||24.06 (611)|
Note: Not all options are available for all models. Refer to the price list for the available models and options. Twelfth digit in model number indicates US or Canadian unit. C=Canada and T=US. * Information shown applies to highest end control available.
For the most accurate information, the installation guide should be used for all design and construction purposes. Due to continuous product improvements, design and specifications subject to change without notice. The quality management system of Alliance Laundry Systems has been registered to ISO 9001.
Huebsch by Alliance Laundry Systems